|
| |
GRAND JUNCTION PIPE
& SUPPLY is your exclusive Schlumberger/Neptune water
meter and meter reading systems distributor for Western Colorado, Southern
and Eastern Utah. We stock the full line of Neptune (formerly
Schlumberger) meters, from the 5/8x3/4 T-10 residential meter thru the 4" HP
turbine meter (sizes to 20" available). Complete with your choice of
direct read or our top of the line AMR ProRead
registers. Grand Junction Pipe also sells and supports the RouteMAPS
meter reading system. RouteMAPS allows a utility to migrate from
conventional route books to touch read or drive-by radio reading. We
have a Neptune factory trained system specialist who can assist you
in finding the right AMR (automatic meter reading) solution for your
utility.
For more information regarding meters please contact
Jimmy Street, Grand Junction Pipe's local meter specialist.
Residential
Schlumberger RMS provides a comprehensive Residential
Meter portfolio to meet the World’s Water Utility requirements.
Schlumberger’s Neptune T-10 continues to be the Water Industry’s
standard. Our quiet Nutating Disk design achieves ultra low-flow
measurement and meets or exceeds current AWWA meter standards. Each meter
is Encoder compatible for remote reading, and may be equipped with a
wide-range of bottom plate and register options, including purple Reclaim
coloration. Every meter and register is manufactured, assembled and tested
in our Nation’s leading ISO 9001 Certified water meter production
facility. ISO 9001Certification assures you that we achieve the highest
possible standards for both manufacturing, and customer service quality.
Neptune T-10 Meter
The Neptune T-10 consists of a sturdy,
corrosion-resistant bronze maincase, nutating positive displacement
measuring chamber, and a roll-sealed register. The T-10, in sizes
5/8", 3/4", and 1", is specifically designed for
residential applications. The T-10 also comes in 1 1/2" and 2"
sizes for larger residential piping needs.
 These
meters are compatible with all Schlumberger electronic registers, direct
reading registers, and those designed for reclaim applications. All
T-10 meters meet or exceed the AWWA C700 standards.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Neptune
RFS Meter
The Neptune Residential Fire Service Meter is
designed for residential and domestic fire sprinkler systems requiring
unobstructed flow to operate. The RFS meter measures water flow
through residential fire service lines without affecting
performance.
 This
meter consists of the same bronze maincase as the Neptune 1" T-10
meter and has a free-flowing bypass chamber that allows water to flow with
very low headloss.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Double
Check T-10 and Dual Check + T-10
The Double Check T-10 and Dual Check + T-10 are
integrally designed units - combining a 5/8” meter with backflow
prevention devices. The maincase is of bronze for durability and
corrosion- resistant durability. The measuring element in both are
the same as a standard T-10 water meter.
 Its
accuracy meets or exceeds the latest AWWA C700 Standard. Both meters
fit a standard residential lay length of 7 ½”.
© 2001 Neptune Technology Group, Inc. All rights reserved.
Commercial and Industrial
Neptune offers a complete line of
Commercial Water meters for all your large meter applications. All
Neptune Commercial meters have a
Unitized Measuring Element that allows for quick, easy, in-line
interchangeability. Neptune Commercial meters offer some of the
widest flow ranges of any meter on the market. All meters meet or
exceed the latest performance and accuracy requirements of current AWWA
standards.
Neptune Tru/Flo Compound
The Tru/Flo is designed to register wide-flow
ranges where varying flow rates are typical. Tru/Flo meters combine
the low-flow sensitivity of a disc-type meter with the high-flow capacity
of a turbine-type meter.
 Each
Tru/Flo consists of a durable bronze maincase, Neptune T-10 chamber, a
patented hydraulic valve, and two magnetic-driven, roll sealed registers.
A calibration vane in the maincase allows for in-line service to extend
life and ensure accurate registration.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Neptune
High Performance Turbine
Each Neptune HP Turbine water meter consists of a
rugged bronze maincase, an AWWA Class II turbine measuring element, and a
roll-sealed register. The corrosion resistant, lightweight, and
compact turbine in sizes 1 ½", 2,", 3", 4",
6",8" and 10" is designed for applications where the flow
is consistently moderate to high. The HP Turbine’s Unitized
Measuring Element (UME) allows for quick, easy in-line interchangeability.
 The
Neptune HP Turbine also comes in 12", 16 and 20" sizes.
The larger turbine consists of a cast iron maincase, an AWWA Class II
measuring element, and a roll-sealed register. Neptune’s
Tricon-E2 can be used with the HP Turbine for an electronic transmitter
option.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| High
Performance Fire Service Meters
The HP Fire Service Turbine meter in sizes
3",4", 6", 8", and 10" is designed to measure
both domestic and fire service usage where flow rates are moderate to
high. All Neptune HP Fire Service Turbine meters are UL Listed and FM
Approved and include an attached fire service strainer.
 All
fire service turbines meet or exceed the latest AWWA Standard C703.
The fire service turbine meter consists of an epoxy-coated steel fire
service strainer, a rugged bronze maincase, an AWWA Class II turbine
measuring element, and a roll-sealed register.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Neptune
HP Protectus III Fire Service Meter
The Neptune HP Protectus III Fire Service Meter
Assembly is designed to measure both domestic and fire service water usage
through a single water line. A typical application would be in a
warehouse, hotel, or hospital where one water line may supply any number
of faucets or bathrooms, as well as an automatic sprinkler system.
 All
Neptune HP Fire Service Meters are UL Listed and FM Approved and also meet
and exceed AWWA Standard C703. The Protectus consists of an
epoxy-coated steel mainline body, epoxy-coated strainer, a Neptune HP
Turbine measuring element, and bronze bypass assembly.
© 2001 Neptune Technology Group, Inc. All rights reserved.
Systems
Schlumberger – the leading edge supplier of Hand-Held
Meter Reading Systems. Not only do we provide state-of-art software to
manage information, but with our ProRead Absolute Encoder, you are
guaranteed that the information is 100% accurate.
A large, backlit screen, multi-function keyboard,
fast data transfer and adapters to read Encoders, make the DAP PC9300 one
of the most productive, easy-to-use handheld computers today. The DAP
PC9300 with its Windows 95 compatible Route Management Software, EZ Route,
makes the task of managing meter reads as simple as “point and click”.
The Advantage wand allows you to read both our
ARB V and ProRead encoders. Its unique “Cordless” design provides a
reliable, hassle-free remote meter reading solution.
Touch the Pocket ProRead to a remote receptacle
and instantly view the meter reading: it just can’t be simpler!
Now, with Neptune, the leader in Hand-Held
Meter Reading Systems and Information Management, you are ready to
move to the next level!
Advantage II
The Advantage II is a remote meter reading probe
with a cordless communication interface to compatible handhelds.
With a single trigger pull, the Advantage automatically senses the
register type, captures the read, then transmits it to the handheld.
 This
device also serves as an excellent visual reader/tester and installation
tool.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Neptune
ProRead ARB
The ProRead ARB is setting new standards in
encoder technology. With the ProRead encoder installed, utilities
have the base to migrate to a totally automated metering system.
The ProRead can be wired to
both wall and pit remote receptacles. Ideal applications for the
ProRead include for compounds, manifold settings, and submetering.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| Pocket
ProReader
The Pocket ProReader is a compact visual reading
device capable of reading ProRead and Sensus remote receptacles.
With the ProReader meter readers can test new installations, obtain
readings and meter identification numbers in a faster, more efficient
manner.
 The
Pocket ProReader can be conveniently carried in a pocket or clipped to a
belt and is designed to fit in any hand.
© 2001 Neptune Technology Group, Inc. All rights reserved.
Neptune
ARB
The Neptune ARB System is designed to reduce utility
operating cost by speeding and automating the reading of meters.
 The
ARB V system can modernize and extend the advantages of remote reading by
collecting meter reading data in the fastest, most trouble-free manner and
reporting the data in a form compatible with automatic processing.
© 2001 Neptune Technology Group, Inc. All rights reserved.
| | | | | | | | | | | | | | | | | | | | | |
|
